new logo paint point png-01
Sale!
, , , , , , , , , , ,

SEA STAR GROUT AD MIX

Original price was: ₨ 350.Current price is: ₨ 280.

Value

22-25 %

7.0

30.0

20

– 5

0.90

0.15

< 3

2.5

1000

Method

 

ISO 976

 

ISO 3219

PHYSICAL DATA

Form
Color
Odour
pH
Boiling Point
Flash Point
Ignition Temperature
Water Solubility
Solid Content

Liquid
Milky
Faint
7.0- 9.0 (20 C)
100C WATER
No flash point
Not applicable
Dilutable
Low 22 – 25%

GENERAL INFORMATION

SEA STAR CONCRETE RUBBER-LITE is used in combination with cement, lime gypsum, etc. Addition of SEA STAR CONCRETE RUBBER-LITE improves workability, wet adhesion and plasticity of fresh mortars. The dispersion has a strongly liquefying effect and reduces the water requirement at the same mortar consistency. SEA STAR CONCRETE RUBBER-LITE improves following end properties, flexural strength (up to 30 %), adhesive strength, abrasion / water / chemical / freeze / thaw resistance and shrink /swell behavior. SEA STAR CONCRETE RUBBER-LITE has extremely good resistance to saponification, by which long term stability in the strongly alkaline region even under moist conditions is secured.

The dispersion has no corrosion promoting action on steel reinforcements and is film forming above + 3 °C. Additions of film forming agents or plasticizers are therefore not required. SEA STAR CONCRETE RUBBER-LITE is used in floor, screeds, leveling compounds, adhesive – bonded joints, sealers / primers, repair mortars for concrete restoration, cement – based anti-corrosion paints, gypsum –based stoppers / fillers, and building adhesives. Owing to the limited UV-stability of styrene – butyl copolymers surface chalking can occur. This behavior is identical with unmodified mortars. Addition of 10 – 50 % by weight of SEA STAR CONCRETE RUBBER-LITE related to the cement content is recommended for the improvement of mortars.

APPLICATION ADVICE

SEA STAR CONCRETE RUBBER-LITE is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation.

HAZARDS IDENTIFICATION

On available data SEA STAR CONCRETE RUBBER-LITE has no hazard classification according to 88/379 EEC. The surfactants and to a lesser extent the free monomer present in polymer dispersions can cause dermatitis through repeated contact in sensitive individuals. Eye contact may cause irritation.

COMPOSITION AND COMPONENTS

Chemical Nature:

Isononylphenol ,ethoxylated

Aqueous dispersion of a copolymer of styrene and1,3 Butyl

>=1%

STABILITY AND REACTIVITY

Stability
Conditions to avoid

Stable
Direct sunlight and freezing

DISPATCH AND STORAGE

SEA STAR CONCRETE RUBBER-LITE has to be stored protected from frost and, as far as possible, below 40°C. Storage at temperatures between + 5 and + 30 °C is recommendable. SEA STAR CONCRETE RUBBER-LITE contains a preservative to counter microbial attack during transportation. Care must be taken to ensure that storage containers are tightly closed. When stored correctly SEA STAR CONCRETE RUBBER-LITE has a storage life of 12 months from date of delivery.

EXPOSURE CONTROL AND PERSONAL PROTECTION

Exposure Controls:

Local exhaust ventilation may be required in circumstances where the product is sprayed, heated or dried.

Personal Protection

Respiratory:
Hand:
Eyes:
Skin

Masks when spraying
Gloves if risk of skin contact
Goggles if risk of splashing
Standard industrial overalls if splashing.

First Aid Measures

Skin exposure:
Eye exposure:


Ingestion:

Wash with water removed contaminated clothing.
Wash with large amount of water. Seek medical attention if irritation persists.
Give plenty of water to drink and obtain medical advice.

SKU: N/A Categories: , , , , , , , , , , , Tags: , , , , ,

SEA STAR GROUT AD MIX

LIQUID POLYMER ADMIXTURE FOR TILE GROUT

SEA STAR GROUT ADMIX is a versatile liquid polymer dispersion based on vinyl acetate and ethylene. Use it as a substitute for water to mix the cement based tile grouts to improve the grout adhesion and mechanical strength and to reduce porosity and absorption

APPLICATION

Suitable to use with SEA STAR tile grout in interior and exterior location both dry & wet conditions.

  • Grouting facades, balconies, terraces and swimming pools.
  • Grouting bathrooms, kitchens and wet areas.
  • Grouting glass mosaics.
  • Grouting floors with heavy traffic.
TYPICAL PROPERTIES

Consistency
Color
Pot life
PH-value
Solid content
Density at 20 c

Liquid
White
approx. 45 mins
6.0 – 7.0
20%
approx. 1g/cm3

Packaging Size

Available in 300ml bottle.

FEATURES & BENEFITS

Addition of SEA STAR GROUT-ADMIX in tile grout greatly improves

  • Strength / Adhesion
  • Flexibility
  • Water resistance
  • Abrasion resistance
  • Non-shrinkage
MIXING
  • For 01kg tile grout add 300ml GROUT –ADMIX.
  • Mix thoroughly to obtain smooth consistency.
  • Use it as a total water replacement, no need to add water but can be added in small quantity if needed.
Shelf Life

12 months if stored in dry place in an unopened packing.

Choose Size

300 ML

Reviews

There are no reviews yet.

Be the first to review “SEA STAR GROUT AD MIX”

Your email address will not be published. Required fields are marked *

Related products

Shopping Cart
Paint-Poin-Logo

Paint Point is Premium Paint shop in Karachi Pakistan, offering quality paints such as ICI Dulux, Berger Paints, Nippon Paints, Kansai Paints, Reliable Paints, Reliance Paints, Apollo. We deal quality Heat Proofing and Waterproofing solution. 

  • Karachi Pakistan
  • info@paintpoint.pk
  • 0332-8111360

Shop BY Brands

Quick Links

Color Disclaimer

We cannot guarantee that the color you see accurately portrays the true color of the product. This is due to the fact that every computer monitor has a different capability to display colors and that everyone sees these colors differently. We try to edit our photos to show the samples as life-like as possible.

Our Location

Let's Chat!
Call Us
Close
x