SBR, SEA STAR TILE BOND & WATER PROOFING, Special Coatings, Water Proofing

Express Royal SBR 1020

Name: Sea Star Concrete Rubber Lite (5 + 1) - Superior Waterproofing Solution | Paint Point
Availability: OutOfStock

Value

22-25 %

7.0

30.0

– 5

0.90

0.15

< 3

2.5

1000

Method

ISO 976

ISO 3219

PHYSICAL DATA

Form
Color
Odour
pH
Boiling Point
Flash Point
Ignition Temperature
Water Solubility
Solid Content

Liquid
Milky
Faint
7.0- 9.0 (20 C)
100C WATER
No flash point
Not applicable
Dilutable
Low 22 – 25%

GENERAL INFORMATION

SEA STAR CONCRETE RUBBER-LITE is used in combination with cement, lime gypsum, etc. Addition of SEA STAR CONCRETE RUBBER-LITE improves workability, wet adhesion and plasticity of fresh mortars. The dispersion has a strongly liquefying effect and reduces the water requirement at the same mortar consistency. SEA STAR CONCRETE RUBBER-LITE improves following end properties, flexural strength (up to 30 %), adhesive strength, abrasion / water / chemical / freeze / thaw resistance and shrink /swell behavior. SEA STAR CONCRETE RUBBER-LITE has extremely good resistance to saponification, by which long term stability in the strongly alkaline region even under moist conditions is secured.

The dispersion has no corrosion promoting action on steel reinforcements and is film forming above + 3 °C. Additions of film forming agents or plasticizers are therefore not required. SEA STAR CONCRETE RUBBER-LITE is used in floor, screeds, leveling compounds, adhesive – bonded joints, sealers / primers, repair mortars for concrete restoration, cement – based anti-corrosion paints, gypsum –based stoppers / fillers, and building adhesives. Owing to the limited UV-stability of styrene – butyl copolymers surface chalking can occur. This behavior is identical with unmodified mortars. Addition of 10 – 50 % by weight of SEA STAR CONCRETE RUBBER-LITE related to the cement content is recommended for the improvement of mortars.

APPLICATION ADVICE

SEA STAR CONCRETE RUBBER-LITE is preserved against bacterial and fungal attack. In the manufacture of finished products, the material has to be retreated, as usual, with suitable biocides to give enhanced preservation.

HAZARDS IDENTIFICATION

On available data SEA STAR CONCRETE RUBBER-LITE has no hazard classification according to 88/379 EEC. The surfactants and to a lesser extent the free monomer present in polymer dispersions can cause dermatitis through repeated contact in sensitive individuals. Eye contact may cause irritation.

COMPOSITION AND COMPONENTS

Chemical Nature:

Isononylphenol ,ethoxylated

Aqueous dispersion of a copolymer of styrene and1,3 Butyl

>=1%

STABILITY AND REACTIVITY

Stability
Conditions to avoid

Stable
Direct sunlight and freezing

DISPATCH AND STORAGE

SEA STAR CONCRETE RUBBER-LITE has to be stored protected from frost and, as far as possible, below 40°C. Storage at temperatures between + 5 and + 30 °C is recommendable. SEA STAR CONCRETE RUBBER-LITE contains a preservative to counter microbial attack during transportation. Care must be taken to ensure that storage containers are tightly closed. When stored correctly SEA STAR CONCRETE RUBBER-LITE has a storage life of 12 months from date of delivery.

EXPOSURE CONTROL AND PERSONAL PROTECTION

Exposure Controls:

Local exhaust ventilation may be required in circumstances where the product is sprayed, heated or dried.

Personal Protection

Respiratory:
Hand:
Eyes:
Skin

Masks when spraying
Gloves if risk of skin contact
Goggles if risk of splashing
Standard industrial overalls if splashing.

First Aid Measures

Skin exposure:
Eye exposure:

Ingestion:

Wash with water removed contaminated clothing.
Wash with large amount of water. Seek medical attention if irritation persists.
Give plenty of water to drink and obtain medical advice.

SKU: N/A Categories: SBR, SEA STAR TILE BOND & WATER PROOFING, Special Coatings, Water Proofing Tags: CONCRETE RUBBER, CONSTRUCTION SOLOUTION, Tile Grout in Nagan Chowrangi, Tile Grout in Naya Nazimabad, Tile Grout in North Karachi, Tile Grout in Up More