SEASTAR MULTIFIX-20Kg
General purpose, cement based high quality component, thin or thick bed wall and floor tile adhesive for interiors only
MULTIFIX – STA300 is a cement based general purpose tile adhesive for thin or
thick bed fixing of small format tiles (600x600mm) in interior situations.
MULTIFIX – STA300 is suitable for fixing materials such as ceramic tiles, porcelain tiles, Marble and Stones.
TYPICAL PROPERTIES
- Colors : Off white and Grey
- Density : 1.1kg/m³
- Yield : A 20kg bag mixed with 5 liters of water yields 15.5 liters of mixed adhesive.
- Toxicity : MULTIFIX – STA300 is non-toxic and can be safely used in conjunction with potable water.
APPLICATIONS PROCEDURE
The surface to be tiled should be sound, dimensionally stable, clean and free from dusty or friable materials, paint, grease, oil etc.
SUITABLE SUBSTRATE
- CONCRETE
- CEMENT SAND SCREED
- PLASTER
COVERAGE
- Thin-bed fixing: 3 – 4kg/m² at 3mm thickness (Smooth surface using notched trowel)
- Solid-bed fixing: 6 – 8kg/m² at 6mm thickness
MIXING INSTRUCTIONS
- Mix MULTIFIX – STA300 in clean water at the rate of 3:1 by volume(approx. 5 liters water in a 20kg bag)
- Leave to stand for 5 minutes then stir. Don’t add further water.
COMPOSITION, PROPERTIES, APPEARANCE
MULTIFIX – STA300 is a blend of Portland cement and graded Sand, reinforced with additive content, with thin / thick bed performance.
APPLICATION INSTRUCTIONS
- Apply MULTIFIX–STA300 to a depth of 3-6mm on working area of not more than 1m². (See Note 1)
- In wet conditions and for floor tiles and for all other vertical applications, the adhesive bed should be combed horizontally with a notched trowel to remove excess.
- Fix dry tiles by pressing into place with slight twisting motion ( See Note 2 )
- Ensure that at least 90% of each tile is in contact with adhesive.
- CClean off surplus adhesive from the face of the tile with a damp cloth. Similarly, joints must be raked out in readiness for grouting.
- Leave for a minimum of 24 hours before grouting.
Note:
- Solid-bed fixing is recommended for wet conditions and for ceramic, Terrazzo and Marble flooring tiles and vertical
applications including decorative Stones. But unlike the application of ordinary tiles, apply to the stone as well. - Fix tiles (which should be dry) by pressing into place. Beginning at the bottom in the case of wall tiles and at center markings in the case of floor tiles.
- Solid-bed fixing is recommended for wet conditions and for ceramic, Terrazzo and Marble flooring tiles and vertical
Please follow and like us:
Reviews
There are no reviews yet.