ROAD & SAFETY MARKING · KARACHI

Road Marking Services in Karachi

Clear, durable road and parking markings for housing societies, plazas, factories, hospitals and private roads. Paint Point applies thermoplastic and road marking paint for lines, parking bays, zebra crossings, speed breakers, kerbs and safety zones — with reflective glass beads for night visibility.

  • Thermoplastic & road paint
  • Reflective night-visible lines
  • Parking layout planning
  • Roads, parking & factory floors
Road line marking with thermoplastic paint in Karachi by Paint Point
25+ Years in paints
& coatings
SAFETY STARTS ON THE SURFACE

Markings That Guide, Protect & Last

Faded lines and unmarked parking create confusion, wasted space and accidents. Drivers cannot see lanes at night, pedestrians cross where they should not, and parking areas fit far fewer cars than they could. Clear, well-planned markings solve all of this at a small fraction of the cost of the road itself.

Paint Point provides complete road and safety marking in Karachi — from planning the layout to cleaning the surface, setting out the lines and applying the right material. We use thermoplastic for high-traffic roads, fast-drying road marking paint for parking and low-traffic areas, and epoxy marking for indoor floors.

Reflective glass beads can be added so lines stay visible in headlights and rain, and every job is sectioned off and reopened only once the marking has set.

WHAT WE MARK

Road & Safety Marking Services

Every type of line, symbol and safety marking — outdoors and indoors.

01

Road Lines

Centre lines, edge lines and lane markings for internal and private roads.

02

Parking Lot Marking

Bays, driving lanes, arrows, bay numbers and reserved spaces.

03

Zebra Crossings

High-visibility pedestrian crossings for roads, campuses and societies.

04

Speed Breakers

Yellow and black or white striping that makes bumps visible from a distance.

05

Kerb Painting

Black-and-yellow and black-and-white kerb stones for roads and medians.

06

Factory Safety Lines

Walkways, forklift lanes, hazard stripes and no-go zones on factory floors.

07

Arrows, Symbols & Text

Direction arrows, STOP, SLOW, entry and exit, and disabled-bay symbols.

08

Helipad Marking

H symbol, touchdown circle and perimeter markings in standard colours.

MATERIALS

The Right Marking Material for the Job

Chosen for traffic level, surface type, visibility and budget.

Thermoplastic Marking

Hot-applied, thick and long-lasting — the best choice for busy roads and highways.

Road Marking Paint

Fast-drying, economical paint for parking areas, societies and low-traffic roads.

Reflective Glass Beads

Added to the marking so lines shine in headlights at night and in rain.

Epoxy Floor Marking

Hard-wearing lines for indoor factory, warehouse and basement floors.

Kerb & Speed Breaker Paint

Weather-resistant colours for kerbs, bumps and medians.

Anti-Skid Coating

Textured coatings for ramps, crossings and slippery areas.

OUR PROCESS

How We Apply Road Markings

Proper preparation is what makes a marking stay bright and sharp.

1

Site Survey

We measure the area, check the surface and understand traffic flow.

2

Layout Plan

Lines, bays, arrows and symbols are planned and shared for approval.

3

Surface Cleaning

Dust, oil, loose material and old flaking marking are removed.

4

Setting Out

Lines and symbols are measured and marked out on the surface.

5

Primer

Concrete and older surfaces are primed where needed for strong bonding.

6

Application

Thermoplastic or road paint is applied with glass beads where required.

7

Curing & Reopening

The area stays closed until the marking sets, then reopens to traffic.

PROJECT COST

What Affects the Cost of Road Marking?

Road marking is priced on quantity and material. After a free site survey, your quotation is based on:

  • Quantity — total running length of lines and area of markings
  • Material — thermoplastic, road marking paint or epoxy
  • Surface — asphalt or concrete, new or old, and its condition
  • Symbols & text — arrows, bay numbers, letters and special symbols
  • Old marking — whether faded or wrong lines need removing first
  • Extras — glass beads, kerbs, speed breakers and anti-skid areas

Get a Free Quote

Send us your location, approximate area and photos or a site plan on WhatsApp. We will survey the site and share a layout and quotation.

WhatsApp for Quote → Call 0332-8111360
WHO WE WORK WITH

Marking for Every Type of Site

Housing Societies

Internal roads, zebra crossings, speed breakers and kerbs.

Malls & Plazas

Basement and surface parking with bays, arrows and numbering.

Factories & Warehouses

Forklift lanes, walkways, loading bays and hazard zones.

Hospitals & Schools

Drop-off zones, crossings and clear parking for visitors.

Petrol Pumps

Entry and exit arrows, lanes and forecourt markings.

Offices & Campuses

Private roads, visitor parking and reserved bays.

Helipads & Rooftops

Helipad symbols and safety markings in standard colours.

Sports & Open Areas

Courts, play areas and boundary lines.

SERVICE AREAS

Road Marking Across Karachi

We provide road and parking marking services across Karachi, including:

DHABahria TownCliftonDHA City Scheme 33Gulshan-e-IqbalShahra-e-FaisalPECHS SITE AreaKorangi Industrial AreaPort QasimNorth Karachi MalirSuper HighwayNaya NazimabadGulistan-e-Jauhar
FAQS

Road Marking Questions

What is the difference between thermoplastic and road marking paint?

Thermoplastic is a hot-applied material that forms a thick, raised line and lasts much longer under heavy traffic. Road marking paint is applied cold, costs less and dries quickly, which suits parking areas, low-traffic roads and indoor floors. We recommend the right material after checking your site and traffic.

How long does road marking last?

It depends on the material and traffic. Thermoplastic lines on busy roads usually last several years, while paint-based markings in parking areas or low-traffic zones typically need a refresh every one to two years. Tyre wear, sun and dust all affect the life of the marking.

How soon can traffic use the road after marking?

Thermoplastic sets within minutes of application as it cools. Road marking paint is usually touch-dry fairly quickly but needs longer before heavy traffic. We section off the area and advise when it can be reopened.

Do you mark on concrete as well as asphalt?

Yes. Both surfaces can be marked, but each needs the right preparation. Concrete is cleaned and, where needed, primed so the marking bonds properly, while new asphalt may need to cure before marking.

Can you design the parking layout for us?

Yes. We can plan bay sizes, driving lanes, arrows, numbering and reserved or disabled bays to make the best use of your space, and share the layout with you before marking starts.

Are your road markings reflective at night?

Yes. We can add glass beads to thermoplastic and road marking paint, which reflect vehicle headlights and make lines clearly visible at night and in rain.

Shopping Cart
Let's Chat!
Call Us