Flex-C2-20Kg
AREA OF APPLICATION/USES
- For all type of masonry substrates such as sand/cement render, precast concrete, gypsum board, sound painted
walls, where an extended open time is required. - For installation of ceramic and porcelain tiles.
- Over Tiles. Tile on Tile application.
- For residential, commercial and industrial purpose, swimming-pools, facades, bathrooms, balconies, terraces and
parking areas.
ADVANTAGES
- Single component – just mix with water.
- Available in white color.
- Easy to use — thixotropic.
- Very good tensile adhesion strength.
- Extended open time.
- Suitable for low porosity tiles.
- For indoor & outdoor floors/walls tiling.
- Excellent adhesion to all substrates.
COVERAGE
- Thin-bed fixing: 3 – 4 kg/m² (Smooth surface using notched trowel)
- Solid-bed fixing: 6 – 8 kg/m² (Smooth surface using notched trowel)
SURFACE PREPARATION
The substrate should be sound, clean, free from loose material, grease, dirt or any other substance that might impair bond quality with the substrate. Concrete, hollow blocks, and cement-based substrates must be sufficiently cured. The surface should appear damp with no water pooling. Gypsum boards, plasterboards, anhydrite screeds must be sufficiently dry and free from dust.
MIXING
Mix 20kg FLEX C2 with 5-6 liters of clean cool water (3:1 ratio) until a smooth, lump-free paste is obtained. Leave the paste to rest approximately 5 minutes before starting the application.
Technical Data
-
Product Name Typical Values Appearance White or grey Application Thickness 2 to 8 mm Pot Life 60 mins Mixing ratio 30 parts water for every 100 parts of tile adhesive. Open time ≥ 30mins Adjustability time Approx. 30mins EN 12004 Classification C2TE
Reviews
There are no reviews yet.